Why Use An Exoracing Titanium Bolt Kit?

After owning a K-Series for a while, you will notice that they become rusted or rounded after removing and refitting the water pump housing bolts. This is where our titanium kit comes in.

Our range of Exoracing titanium hardware is built using the finest aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5), a material renowned for its exceptional strength-to-weight ratio.

We take pride in that all our titanium fasteners are forged, and the threads are made using a unique rolling process. This results in increased resistance to fatigue and a reduced risk of galling during fastening. Our Grade 5 Titanium hardware is a reliable replacement for Grade 8.8 steel fasteners, offering a weight saving of approximately 45% compared to equivalent steel bolts.

This significant weight reduction is particularly beneficial in the racing industry, where every ounce matters. This kit only weighs a small 120g, which is always helpful and will compound as you start changing your engine bolts for titanium.

In addition to the weight savings, Titanium is exceptionally corrosion resistant to a wide range of aggressive chemicals, ensuring a longer service life than standard BZP steel bolts. This allows our hardware to perform exceptionally well in harsh environmental conditions, making it a popular choice among racing enthusiasts.

Overall, our Titanium hardware for racing is a top-of-the-line choice that guarantees superior performance, durability, and reliability.

We also now offer a massive Exoracing limited lifetime warranty against manufacturing defects. We are confident in our titanium range and want to provide a risk-free buying experience.

Purchase Includes:

• 3 x Exoracing Titanium Hex Head Grade 5 Bolts
• 1 x Exoracing Titanium Flanged Hex Grade 5 Nut
• 1 x Exoracing Lifetime Warranty

Features:

• Will fit most K-Series water pump housings
• Replace your old, ugly OEM bolts
• Weight saving of up to 45% compared to the OEM hardware
• Incredibly resistant to corrosion and harsh chemicals
• Kit weight: 120g
• Manufactured from high-grade Titanium Alloy, Ti-6AL-4V (Grade 5)
• Exoracing lifetime warranty

Exoracing Titanium Water Pump Housing Bolts Installation Guide:

Follow our quick and easy steps below to install your brand-new titanium water pump housing bolts as quickly as possible. If you are unsure about any of the steps below, please get in touch with us or a professional who can assist you further.

1. First, ensure the engine is cool to the touch to avoid the risk of burns.
2. Locate the water pump and remove the nut on the top right. Install the Exoracing titanium nut on the stud and tighten it to hold the water pump in place without leaking coolant.
3. Remove the 3 bolts one by one and install the titanium bolts before moving to the next one. Follow the same tightening method as the nut to prevent coolant leaks.
4. If you have to remove the water pump for any reason, use a small but full coverage of the Genuine Hondabond to reseal the water pump housing to the block.
5. Now, torque the bolts and nut to the factory specification of 33 Ft/lb, and you are all done!
6. Remember to tag us in any photos on social media, as we would love to see your builds. #exoracinguk

Technical Specifications:

Notes:

• Water pump and housing not included
• Professional installation is always recommended.
• Please torque all bolts to the manufacturer's specifications in our installation guide and table.