Key Performance Features

• 12V Hardwired Reliability: Connects directly to your house battery system. This ensures the alarm is always active as long as your battery has a charge, eliminating the risk of a "dead battery" silence found in standalone units.

• Surface Mount Design: This model sits on top of the wall surface, making it the ideal choice for retrofitting or replacing units where you don't want to cut a large recessed hole in your cabinetry or paneling.]

• Rapid Recovery Sensor: Features a highly sensitive, commercial-grade sensor that quickly resets after an alarm event once the air has cleared.]

• Low Power Draw: Engineered for minimal battery consumption—drawing only $60$$\text{mA}$ —which is critical for boondocking or dry camping.

• End-of-Life Signal: To ensure safety, the unit features a built-in timer that alerts you when the sensor has reached the end of its 5-year useful life and needs replacement.

Technical Specifications

In The Box

• 1 x Safe-T-Alert 62 Series CO Alarm (White)

• Mounting Screws

• Wire Connectors

• Instruction Manual / Installation Guide

Installation & Safety Pro-Tips

• Placement Matters: Carbon monoxide is roughly the same weight as air and distributes evenly. Mount the alarm at eye level or higher on a wall, but at least 6 inches away from any corners. Avoid mounting near windows or fans that might dilute the air around the sensor.

• Check the Date: These units have a 5-year lifespan. Always check the "Replace By" date on the housing. If your current unit is chirping intermittently (and it's not a low battery signal), it likely means the sensor has timed out.

• Wiring: The Red wire connects to your 12V positive (+) source, and the Black wire connects to your 12V negative (-). Use a dedicated fuse or connect to a circuit that cannot be accidentally turned off by a wall switch.

Is this a replacement for an older recessed (flush mount) unit?

If you are replacing a unit that was "sunk" into the wall, this surface mount model will sit on top of the existing hole. Would you like me to find the Safe-T-Alert 62-542-WT (Flush Mount) model instead to see if it matches your current cutout dimensions?