Klein Tools

M2O08721KIT

Outlet Repair Kit

NCVT1P - Non-Contact Detection and Testing of AC Voltage; Not Recommended for Tamper-Resistant Outlets / K11095 - Cuts and Strips Wires / 32308 - Fastening; Impact Driving

3

NCVT1P Non-Contact Voltage Tester Pen, 50 to 1000V AC

K11095 Klein-Kurve Wire Stripper / Cutter, 8-20 AWG

32308 8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver

Retail

NCVT1P - 5.5'' (14 cm) / K11095 - 7.25'' (18.4 cm) / 32308 - 4.81'' (12.2 cm)

NCVT1P - 1'' (2.5 cm) / K11095 - 2.33'' (6 cm) / 32308 - 1.42'' (3.6 cm)

NCVT1P - 0.72'' (1.8 cm) / K11095 - 0.61'' (1.5 cm) / 32308 - 1.42'' (3.6 cm)

Yellow & Black / Blue & White / Black & Yellow

NCVT1P: Polymer Body and Electronic Components

K11095: Steel

32308: Stainless Steel Barrel & Plastic

NCVT1P:

Drop Protection: 6.6' (2 m)
Voltage: 50 - 1000V AC
Frequency: 50 - 500 Hz
Pollution Degree: 2
Standard: CAT IV 1000V
Batteries: 2 x AAA (Included)

K11095:

Insulated: No
Strips and Cuts: 8-18 AWG Solid, 10-20 AWG Stranded
Screw Shearing: 6-32, 8-32
Wire Gauge: 8-18 AWG Solid, 10-20 AWG Stranded
Hold-Open Spring: Yes
Handle Finish: Comfort Grip

32308:

Nut Driver Sizes: 1/4"
Phillips Bits: #1, #2, #3
Slotted Bits: 3/16'' (4.8 mm), 1/4'' (6.4 mm)
Square Bits: #1, #2
Bit Retention: Magnetic
Insulated: No
Handle Type: Cushion Grip
Handle Length: 2.5'' (6.4 cm)

NCVT1P:

Voltage Tester provides non-contact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires

Volt Pen with high intensity, bright green LED indicates the tester is powered on

When voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound

50 to 1000 VAC power operating range allows broad application

Auto power-off feature conserves and extends battery life

CAT IV 1000V safety rating

Lightweight compact design with a convenient clip to fit securely in your pocket

Product not recommended for testing tamper-resistant outlets; use Cat. Nos. NCVT-2P or NCVT-3P in low voltage mode

Includes instructions and 2 x AAA 1.5 volt batteries

6.6-Foot (2 m) drop protection

K11095:

Wire Stripper with six precision ground stripping holes for 8-18 AWG Solid and 10-20 AWG Stranded wire

Narrower head geometry gets into hard to reach places

Screw shearing holes for 6-32 and 8-32 bolts and precision, shear-like blades that provide clean cuts

Dual wire looping holes

Made in USA

Updated lock tucks out of the way

Coil spring provides fast self-opening action

Klein-Kurve™ comfort grip handles with extended tool coverage

32308:

Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver

Compact driver reaches easily into tight spots

Industrial-strength bits that are conveniently housed in the handle

Adjust the length of the blade for easier access

Impact rated blade can be removed for use as an impact driver attachment

Stainless steel bit holder contains powerful Rare-Earth magnets for securing bits and fasteners

Cushion-Grip™ handle for maximum comfort