Key Features

• Run-Dry Protection: The bellows-style design ensures the pump will not be harmed if it continues to run after the tank is empty.

• Self-Priming: Capable of self-priming up to 10 feet (3.3 meters) of water, allowing for flexible mounting locations above the tank.

• High Efficiency: Operates on 24V DC and draws only 3 amps, making it an energy-efficient choice for marine electrical systems.

• High Flow Rate: Delivers a peak flow of 300 gallons per hour (5 gallons per minute) to empty holding tanks or fish boxes quickly.

• Quiet Operation: Recently redesigned to reduce audible noise through optimized pump stroke balance and a revised gear drive.

Technical Specifications

• Voltage: 24V DC

• Amperage Draw: 3 Amps

• Ports: 1-1/2" (38 mm) barb fittings for sanitation hose or PVC pipe.

• Solids Handling: Can pass solids up to 1/2" (13 mm) without clogging.

• Dimensions: Approximately 6-3/4" W x 7-3/4" H x 13-3/4" L.

• Weight: 7 lbs (3.2 kg).

What’s in the Box

• T Series Pump Assembly: The complete 24V motor, gear drive, and bellows unit.

• Pre-installed Duckbill Valves: Critical for maintaining suction and preventing backflow.

• Installation Instructions: Guidelines for proper electrical and plumbing setup.

• Warranty Information: Typically includes a 1-year limited manufacturer warranty.

Important Note: This pump is specifically for tank discharge (holding tanks, grey water, or fish boxes). It is not a substitute for a VacuFlush vacuum pump, and using it as one will cause damage to the system.