Compatible models: [Honda] Cross Cub (JA10) | Cross Cub 110 (JA45) | Super Cub 110 | Super Cub 110 Pro

"Crankshaft support adapter" which changes the crankshaft journal from 2-point support to 3-point support, suppresses crankshaft vibration that occurs in the high rotation range, and increases the durability of stock crankshafts ■ Details Generator for target vehicles Since it is attached to the L. crankcase cover, the flywheel installation direction is closer to the outside (shaft tip). For this reason, the rotating weight of the heavy flywheel is applied to the outside of the crankshaft tip, and in engines with improved pickup, the load during acceleration and deceleration is doubled. This can cause interference between the generator and flywheel, adversely affecting ignition timing, or in the worst case, damaging the crankshaft. By installing a ball bearing in the stator, this product changes the crankshaft journal from 2-point support to 3-point support, thereby limiting crankshaft runout that occurs in the high rotation range of bore-up engines. By restricting it, runout can be suppressed and the durability of the stock crankshaft can be increased. ■ Patent-pending structure: There is no need to replace the crankshaft, and by attaching it to the genuine parts, the crankshaft journal can be supported at three points. Precautions for use ■ Precautions: Before purchasing, please confirm that the crankshaft is currently being used. It is necessary to check the stock crankshaft. If the crankshaft is running out more than the standard value, it is necessary to correct the runout or replace the crankshaft.


Manufacturer: ‎Special Parts Takegawa
Brand: ‎Special Parts Takegawa (TAKEGAWA)
Model name: ‎01-10-0139
Package size: ‎24.6 x 18.6 x 2 cm; 220 g
Product model number: ‎01-10-0139
Product weight: ‎220 g